三英精控(天津)仪器设备有限公司

PRODUCT

PRODUCT

Number of views:
1008

PMC400

Retail price
0.0
Market price
0.0
Number of views:
1008
Product serial number
Category
Controller
Quantity
-
+
Stock:
1
Description
Specification
Ordering guide

PMC400 series controller for stepper motor

 

1.Four axis full closed loop, linear interpolation 

Realize the full closed loop of the four axis movement, the external grating ruler / rotary encoder makes the position adjustment and positioning more accurate, meets the requirements of high performance motion control, and realizes the four axis linear interpolation. 

The initial speed, final speed, acceleration and position of each axle can be set to meet different control environment requirements.

 

2.High performance 32 bit ARM processor

To use 32 bit ARM processor, realized the high precision operational requirements with high dynamic control; digital PID closed-loop control, to ensure that the control and position control deceleration; stepper motor drive to achieve the current maximum support 512 segments and 2.2A, from the 20 motor to meet your freedom to control 57 motors, and guarantee a steady speed step accurate positioning ability.

 

3.TCP/IP protocol

No need to drive software, no operating system restrictions, support from XP, WIN7, WIN8 arbitrary system.

And can connect routers to achieve simultaneous control of tens of axes, or even hundreds of axes.

 

4.Support offline operation

You simply have to write the running process on the PC side, you can download it to the inside of the controller and let the controller run offline so that you can freely control the place where you are not using the computer conveniently.

 

5.Fool type PC side software

Even if people do not understand the software can easily get started; automatic conversion of angle and displacement, to use your most intuitive experience, EXCEL table programming mode, even fully understand the software also can be used to develop free.

 

6.General input and output

8 way general photoelectric coupling input, 8 way general photoelectric coupling output, so that you can freely connect various switch sensors.

 

  1. Customize all kinds of software

 

8.Green version.DLL file

Support various operating systems to facilitate the two development of various languages (VB, VC, LIBVIEW, etc.);

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

PMC400 series controller for stepper motor

 

1.Four axis full closed loop, linear interpolation 

Realize the full closed loop of the four axis movement, the external grating ruler / rotary encoder makes the position adjustment and positioning more accurate, meets the requirements of high performance motion control, and realizes the four axis linear interpolation. 

The initial speed, final speed, acceleration and position of each axle can be set to meet different control environment requirements.

 

2.High performance 32 bit ARM processor

To use 32 bit ARM processor, realized the high precision operational requirements with high dynamic control; digital PID closed-loop control, to ensure that the control and position control deceleration; stepper motor drive to achieve the current maximum support 512 segments and 2.2A, from the 20 motor to meet your freedom to control 57 motors, and guarantee a steady speed step accurate positioning ability.

 

3.TCP/IP protocol

No need to drive software, no operating system restrictions, support from XP, WIN7, WIN8 arbitrary system.

And can connect routers to achieve simultaneous control of tens of axes, or even hundreds of axes.

 

4.Support offline operation

You simply have to write the running process on the PC side, you can download it to the inside of the controller and let the controller run offline so that you can freely control the place where you are not using the computer conveniently.

 

5.Fool type PC side software

Even if people do not understand the software can easily get started; automatic conversion of angle and displacement, to use your most intuitive experience, EXCEL table programming mode, even fully understand the software also can be used to develop free.

 

6.General input and output

8 way general photoelectric coupling input, 8 way general photoelectric coupling output, so that you can freely connect various switch sensors.

 

  1. Customize all kinds of software

 

8.Green version.DLL file

Support various operating systems to facilitate the two development of various languages (VB, VC, LIBVIEW, etc.);

 

 Product Name

Controller for Stepper Motor

Product Model

PMC400

Delivery Term

 

Previous
底部logo
这是描述信息

WeChat

这是描述信息

Mobile website

Sanying MotionControl Instruments Ltd. is a company specializing in the development of precision motion control technology and products, and is committed to providing systematic technical solutions and integration for scientific research, innovative research and development, and manufacturing of high-end instruments and equipment. A professional manufacturer that meets the market's demand for precision motion control technology.

Online customer service
Customer service hotline
022-29516025
Service time:
8:00 - 18:00

Building C21, Venture Capital Headquarters, Wuqing Development Zone, Tianjin

Customer service hotline:022-29516025